• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Table Decoration & Accessories Type: Mats & Pads
  • Place of Origin: Beijing, China (Mainland)
  • Brand Name: TOpplay
  • Model Number: TP-SD202

Packaging & Delivery

Delivery Time 30days
Product Description

  Main technical parameters
1, the downward slide:
According to the measurement of slide line length
Line expanded horizontal length according to the measurement
According to the relative elevation measurement
Average slope based on measurement
Minimum horizontal curvature radius of 10 meters
Rail distance of 600 mm
2, enhance the slide (not manned)
Line length measurement
Expand the horizontal length according to the measurement
According to the relative elevation measurement
Average slope of 28 degrees
Rail distance of 600 mm
Speed of 1.8 m / S
3, block
2 people by car
Wheel number 4
Shaft pitch 760 mm
Wheel spacing 600 mm
Self weight 75.00kg
Outer form length * width * height =1300 * 540 * 750
4, environmental impact
The slide tube rail chute, chute from the height of 1 meters, is composed of a tube (50 x 2.5) support. The ground is provided with a support base, the destruction of vegetation is very little. Better protect the natural environment.

 

second, key parts of the structure
1, slide structure
This slide is mainly composed of traction mechanism tube rail slideway, pulley and composition. Phi x 76 4 seamless rail tube, bracket with thickness of 8 mm plate, supporting a Phi 50 x 2.5 pipe to enhance the track section whose diameter 50 x 3 seamless pipe. For the sake of firmness, all with welding, weld height of 4 mm or so. Rail joint using diameter 68 x 4 inch pipe tube, insert after welding, every 30 meters located around a expansion joints, telescopic left and right slit are inserted inch tube 120 mm, the welding end and at the other end can freely telescopic.
2, block structure
The pulley is mainly composed of car shell (FRP) and chassis.
The chassis has a positive press wheel 4, a side wheel 4, a support wheel 4, and steel rolling wire rope rolling, anti hook, fixed brake plate, hand brake, front and rear collision proof block and the insurance belt. Chassis frame with 30 x 30 x 3 square tube welded and galvanized. A total of 12 wheel pulley, with 45 cars made of steel after quenching and tempering. Hardness of quenched and tempered in HBS240 - 280.
Three, enhance the slide
Lift slide by four tube slide and traction mechanism.
Four pipe below two with tube rail walking track, pulley wheel walking in tube. With the above two tube rail as the left and right spacing block, vehicle rollover. The lifting slideway is arranged on the anti collapse column, wire clamp and wire rope and pulley from hit etc..
Four, traction mechanism
Traction mechanism mainly 7.5kW motor, SW180 worm reducer, Phi 10 wire rope, traction wheel, a rotation wheel component, its speed is 1.8 m / sec. Because the worm gear reducer is adopted, the automatic stop can be stopped when the power is cut off.
Five, electrical control and communication equipment
In addition, the electric appliance part, stop off function, and is also provided with a station communication equipment, to facilitate contact, to ensure the safety of.
Six, site layout
1, on the platform
The platform is the main function of boarding. It is mainly from the beginning and end of the parking board, lifting slide end and downward slide brake mechanism. When lifted up block according to the brake mechanism, vehicle has been stopped or postponed to a parking plate, tourist bus, you can start decline to the end.
In order to prevent lightning, the station is equipped with lightning rod.
2, under the platform
The main function of the platform is under the passenger, is by the downward slide of the end and enhance the slide at beginning end, two brake mechanism and the parking board composition. When the pulley quickly after entering the site, through the two brake, bring the vehicle to a complete stop, braking distance greater than 8 meters.
Seven, limit and protect the safety of the occupant safety device
In order to achieve the purpose of safety, safety protection device necessary design in the slideway and the pulley.
Safety device 1, pulley
Shell is made of glass steel pulley has certain elasticity, thickness greater than 5 mm. In the chassis with a manual device, braking device under normal conditions for braking state, push forward to run, pull back to the brake, so you can to stop or slow. The car is equipped with two safety belts and the starting point, and block access to the platform, a force braking device. Block before and after installed rubber anti-collision block.
Safety precautions 2, slide
Rail with Phi x 80 4 seamless pipes to ensure slide intensity., except for two pipe rail, set in the middle of the a keel, the same is Phi x 80 4 tube. Every four meters located around a support, 4 meters, every 1 meter design without a support bracket, an increase of strength of the slide, to ensure that the slide gauge.
The connection of the pipe head is added with an inch pipe, and the pipe is welded. Set expansion joints, the depth of the tube insertion depth of 120 mm, but also to ensure the safety of the track.
In the lift section, the support spacing is reduced to 3 m due to the lifting angle of 28 degrees.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland)
Transaction Level:
Supplier Assessments:
2 Transactions 70,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $57,000
Learn More